Safely operate your device under Surge Protection Device (SPD)



Every times Electromagnetic interferences, switching and transients are very much common also known as surges, low amplitudes surge are sometimes eliminated by our UPS and others supply systems. Surge protection devices or surge suppressor’s plays measure role to eliminate or to suppress these unwanted surges or voltage spikes. These surges could be under voltage or over voltages, for under voltage UPS or Stabilizer are the best options but for the over voltages SPD are best preferred as it provides a suitable path to these spikes to the ground and keep our systems and under devices safe. These devices are sometimes known as transient voltage surge suppressor.

Surges do not only caused by the direct lightning or switching but also indirect lightning such as ground potential rise and electromagnetic coupling on overhead lines. We are manufacturing and providing our SPD’s too many fields AC applications, telephone industry, signals and communications systems, Security and surveillance, data lines, Gas pipelines, serial ports and LED lights etc. Using these SPD’s the life and satiability increases and also maintains under system tolerance values. Our surge suppressor is having high degree of protection not only to the casing but also into its characteristics. These SPD’s does not absorb any energy from the supply so, whatever the input is it is directly implanted to the working system without any surge value into the fundamental characteristic. 
Attractive technical specification
Our SPD comply with IEC 62305-4, EN 50173-1 and UL 1449 standards. These are built accordingly test facility with respect to IEC 62305-4. We provide a degree of protections of IP20, IP54. Under heavy transients it acts as a self sacrificing agent which makes it more preferable. Our SPD are based on MOV and TMOV which is suitable for highly switching or surge areas, along with this it is has great response time of analyzing and providing a suitable path to ground.

Why JMV?
Bradley is also a JMV brand; we are having a great experience in Surge Protection Device incorporation more than a decade. Before dispatch we test these suppressors independently. 

Superficial
It is a device that provides a suitable path to the transients and surge into the ground and hence protects your valuable devices.

Comments

Post a Comment

Popular posts from this blog

Surge suppressing technology that can pay many dividends

Image
Among all the electrical faults, power surges rushing into your devices can be disastrous leading to fire hazards or can put a halt to the normal function of your devices. Devices exposed to hostile environment and those staying doors are susceptible to surge events. Despite being indoors, your devices are not assured safety. They can still be haunted by the lightning encroaching inside the facility via the transmission lines and communication lines.Another major cause of surges can be– frequent switching activities, electromagnetic induction, etc. They are all unpredictable sources and can hit your devices at any point of time. SPDs are similar to that of a power strip but much more powerful than the power strip. Before discussing the possibility of occurrence of surge events, we will look at the scenario of how we choose a protection unit. A reliable protection system is necessary to clamp the incoming voltage hikes to a threshold level by diverting reasonably high value of trans...
Read more

Ac power surge protection devices to Amp your device’s safety

Image
To simplify convoluted installations into a small circuit is the concern in increasing performance of any equipment or machinery. Equipment is said to be in danger if the withstand level lies below the power of surge. For the same concern surge protective device is equipped on single-phase lines of AC power supply of electronic assemblies. The protective performances of the surge protection devices should be honored by the replacement of traditional circuit from the reduced circuit so as to increase the efficiency and feasibility of the Lightning over voltage protection system and surge protection system devised in the structure.  AC surge protectors are basically employed for 50/60 HZ AC power arrangement along with the rated voltage of 220V to 380V. In addition to, it is also used in the reception/transmission systems, in over voltage transient protection system to shield against direct and indirect effects of lightning, for commercial and industrial field of surge protecti...
Read more

How to network with Photovoltaic SPDs for System safety

Image
PV installations are defenseless when we talk about aftermath of lightning currents occur in a stormy weather. The caliber of any PV installation is defined by the efficiency to which the solar panels can withstand against the potential impact of lightning discharges. Solar Panels and the related solar components are the expensive creation of technology and in case of repeated lightning events; the PV systems cannot undergo repair or any kind of replacement again & again. To deal with the case we have Solar Surge Protection Devices that are cascaded in conjunction with the well-influenced Lightning Protection Systems. Solar SPDs are directly involved with our Photovoltaic electrical systems to provide a discharge path to the surges or over-voltages that can damage our equipment and structure. There is wholesome probability that within a blink of eye an appliance can suffer damage due to fault current generated because of switching or lightning surges, if Surge Protector is not pr...
Read more